Jaws right at the base of the baby pin for more stable mounting of heavier lamps, etc. Knob and one jaw are removable on this clamp. Same jaws & pads as 2E.

Center Jaw Cardellini Clamp Specifications

• Jaw width: 3"
• Jaw capacity: 2"
• Shaft length: 7"
• Weight: 20 oz.

The End Jaw Cardellini Clamp features patented design jaws on one end and baby pin on the other. Slips into tight spaces for mounting lights. Grabs a multitude of shapes. Secure griping with replaceable rubber jaw pads. Good for grabbing objects which are then mounted in a C-stand.

End Jaw Cardellini Clamp Specifications

• Jaw width: 3"
• Jaw capacity: 2"
• Shaft length: 7"
• Weight: 20 oz. 

The Gator Grip (gator clamp) is the same as a Gaffer Grip; a clamp with a jaw equipped with 12 rubber gripping pads that protect the surface being clamped and provide greater clamping ability.

The 2-1/2" Grip Head (aka gobo head) is without a doubt, the most used piece of grip equipment used by grips for film, Digital, still, and video shoots. It's an indispensable tool of the trade. Grip Heads feature two holes of 3/8" and 5/8" diameter and castings that offer positive lock in all directions.

The Junior to Baby Pin Adapter fits into heavy duty aluminum or steel light stands with combo heads or the turtle base of a C-Stand and can be used with other grip accessories as a baby or junior stud. Either end of the adapter will allow use of lights or accessories with baby or junior receivers.

With a padded grip surface and a unique design combining one flat and one v-notched jaw, Mafer Clamps are used to attach fixtures and equipment to a variety of irregular surfaces including furniture.

Manfrotto Variable Friction Magic Arm

The Manfrotto Variable Friction Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening for safe and precise positioning of a light head or camera. It has 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads. It requires a Super Clamp or Base (available separately) for use.

Sandbags are made of 1000 denier Black Textured Nylon with a water resistant polyurethane coating on the inside, triple sewn with a safety strip at the bottom. Sand is encapsulated in a 3 mi poly inner bag, which is heat sealed. Sandbags are manufactured with both a carry handle and a butterfly handle of polypropylene webbing.

The drop ceiling Scissor clamp attaches to all standard drop-ceiling frameworks and has a 3" long 5/8" aluminum baby spud which can be used to attach lights or grip heads too.

Material has grommets for tieing to frame. 12'x 12' Double Scrim / Net (black) with Bag. Size: 12ft. x 12ft. Reduces light 1.2 f-stop.

Used for a chroma key background. Material has grommets for tieing to frame. Rent the 12x Green Screen. 12'x12' Chroma Green Screen. Size: 12ft. x 12ft.

Softens and diffuses direct light. Also introduces a significant amount of ambient bounce. Reduces light output 1.6 f stops. Material has grommets for tieing to frame. Silk White Artificial. 12ft. x 12ft.

Material has grommets for tieing to frame. 12'x12' Single Scrim / Net (black) with Bag. Size: 12ft. x 12ft. Reduces Light .6 f-stop.

Black, Flame Retardant, Blocks 100% of light. Size: 12ft x 12ft

This is a Non collapsible unit for use with 12 x 12 Rags and diffusion of your choice to control light. 144" x144" Aluminum Flat Open Frame w/ 5/8" Pin.

48"x48"x1"x1/4" Aluminum Flat Open Frame w/ 5/8" Pin This is a Non collapsible unit for use with 4x4 Rags, gels and diffusion of your choice to control light.

Used for a chroma key background. Material has grommets for tieing to frame. 6'x6' Chroma Green Screen. Size: 6ft. x 6ft.

Used for a chroma key background. Material has grommets for tieing to frame. 8'x8' Chroma Green Screen. Size: 8ft. x 8ft.

Matthews Studio Equipment 18x24 Flag Kit

Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material. They can be used to protect the camera lens from flares or to control spill light from other sources, or to keep light from reaching certain areas on the set. Most Matthews flags use only a single, horizontally angled support arm which allows for 'close-in', right angle, tight positioning over set walls and interlocking of flags to…

Matthews Studio Equipment 24x36 Flag Kit

Flags are square or rectangular frames with mounting pins attached and covered with a solid cloth material. They are used to control light, whether natural or artificial. Flags can be used to protect the camera lens from flares or to control spill light from other sources, or to keep light from reaching certain areas on the set.

Most Matthews flags use only a single, horizontally angled support arm which allows for 'close-in', right…