Tiffen IRND filters provide a true neutral density beyond the visible range into the near infra-red. IRND filters incorporate Tiffen’s unique ColorCore technology that sandwiches the coating within the filter and allows for easy cleaning without fear of damaging the filter as with surface coated filters. These innovative new filters are made from the finest optically pure glass and are ground and polished to the highest possible standards of flatness and perfect parallelism.

IR ND…

The Tiffen 77mm Neutral Density Filter Kit is a complete filter outfit for the shooter who wishes to create special effects without having to put in any post-production time. This combination of neutral density filters gives you the freedom to make some unique and effective images that would ordinarily not be possible.

The kit contains a 1-stop (0.3), 2-stop (0.6), and 3-stop (0.9) set of ND filters. Using these filters permits you to use slower shutter speeds that can produce blurred…

The Tiffen 77mm T1 Infrared Filter is a high-tech filter targeted towards eliminating infrared contamination at 680nm. This filter will assist you in maintaining your color spectrum when shooting against a dark fabric. You will notice the blacks turn out true with no color cast from the red end of the spectrum.

This filter has been created to help capture a much broader spectrum of color than previous infrared filters - particularly with digital camcorders.  Color shift is a…

The Tiffen 82mm Neutral Density Filter Kit is a set of filters to help you get better shots in bright light as well as assisting you with some special effect images. Neutral Density filters have several uses. They enable the shooter to adjust exposure without affecting color balance. ND filters appear gray and reduce the amount of light reaching the film.

Polarizer filters provide color and contrast enhancement to video. Reflected light often shows up as whitish glare that washes out color in an image. A Polarizer corrects this problem producing deep, dramatically blue skies. It also removes glare from non-metallic surfaces, such as windows and water. Color saturation in general, especially outdoors, can be improved significantly with a polarizer filter.

Tiffen 82mm Rotating Polarizer Features

• Essential general-use outdoor…

The Denecke TS2 time code slate with built in sync box and time code generator reads and displays SMPTE/EBU Time code. The SB-2 SyncBox is mounted in the battery box. The replaceable lexan face and walnut sticks ensure a long and productive life. The SB2 Time Code Generator jams to all standard frame rates, including 30 df.

Denecke TS2 Time Code Slate Features

• High intensity one inch readout
• Easy to replace Lexan face plate
• SB-2 Syncbox mounted internally…

The Denecke TS3 time code slate with built in sync box and time code generator reads and displays SMPTE/EBU Time code. The SB-3 SyncBox is mounted in the battery box. The replaceable lexan face and walnut sticks ensure a long and productive life. The SB3 Time Code Generator jams to all standard frame rates, including 30 df.

Denecke TS3 Time Code Slate Features

• High intensity one inch readout
• Easy to replace Lexan face plate
• SB-3 Syncbox mounted internally…

The Blackmagic SDI to HDMI Mini Converter will accept an SDI signal and convert it to an HDMI output. You can also choose to de-embed SDI audio to balanced AES/EBU or analog audio outputs. Use this device to connect SDI-based equipment to big-screen televisions, video projectors, and other HDMI displays.

Magliner MAG-01 JR-X Converted Junior Cart

The Magliner MAG-01 JR-X Magliner Junior Cart is the most widely used handtruck in the equipment handling industry today. The Magliner Converted Junior Cart is made with the Camera Assistant, Sound, Photographer and Steadi-Cam Operator in mind.

Magliner MAG-01 JR-X Converted Magliner Junior Cart Features:

• Material: Aluminum/Steel
• (2) 8" 4-Ply Tires and (2) 10" 4-Ply Tires
…

The AC Stinger 50 feet is 12 gauge(AWG) cable terminated in a 15 amp edison plug.

The AC Stinger 25 feet is 12 gauge(AWG) cable terminated in a 15 amp edison plug.

The Panasonic BT-LH900/A is an LCD monitor for playback of HD/SD multi-format signals.

Panasonic BT-LH900/A 8.4 inch Multi-Format LCD Monitor Features

• Integrated gamma function for playback of cine-gamma recordings when using the AJ-HDC27FE (Varicam)
• Resolution: 1024 x 768 pixels (XGA)
• Reproduction of 16.7 million colors
• Brightness 300 cd/m2
• Contrast ratio 300:1
• Viewing angle 170°
• Colour temperature adjustable via menu (…

This cast aluminum Hi-Hat works with the extra long tiedowns used on Bogen and Sachtler fluid heads. The 3 legs are drilled with 3/8" holes for mounting it to a wood or metal plate. The overall height is 6 1/4".

The Sachtler DV6 SB Fluid Head relies on step switching for even faster and finer counterbalance of a camera system.

More Sachtler DV6 SB Fluid Head Features

• Temperature range -40° to +60° C / -40 to +140° F
• Camera fitting Touch & Go Plate DV
• Tripod/Pedestal fitting 75 mm bowl, integrated flat base fitting
• Level self-illuminating Touch Bubble

This cast aluminum Hi Hat works with all professional fluid heads with a 100mm ball mount. The 3 legs are drilled with 3/8" holes for mounting it to a wood or metal plate. The overall height is 6".

The Sachtler Hi-Hat features a 100mm Bowl.   Suitable for O'Conner 1030, Sachtler Video 20 and Video 18 tripod heads.

The 150mm Hi Hat fits the Sachtler 30 and 60 heads. At only 7 inches tall, the 150mm Hi Hat provides a great amount of support at an extremely low camera angle.

Features a 3" center hole and 3 location key ways for standard Mitchell base heads. Legs are drilled with 3/8 " mounting holes to secure the Hi-hat to mounting plates. The overall height is 4 1/2".

The Lo-hat is ideal for those extremely low angle shots. Features a 3" center hole and 3 location key ways for standard Mitchell base heads. The overall height is 1 3/4".

The American Grip 2-Rise Baby Roller is a sturdy, professional-grade stand designed for grip and lighting applications.  This stand is ideal for cinema lighting, grip equipment, and on-location setups.