American Grip RS10 Heavy Duty Combo 3 Rise Stand

The American Grip RS10 Heavy Duty Combo 3 Rise Stand has a Rocky Mountain leg for leveling on rough terrain. The stand has a min. height of 44", a max height 12' 5", and weighs 12.25 lbs.

ARRI AS-2 Light Stand

The ARRI AS-2 is a black anodized aluminum lightweight stand measuring at 34.5" folded. The ARRI AS-2 extends to 8'6" and weighs 3.2 lbs. 

Matthews Studio Equipment 3-Rise Beefy Baby Stand

The Matthews Studio Equipment 3-Rise Beefy Baby Stand leg supports now fold down. Legs are made of steel instead of aluminum to provide greater stability and longer wear. The top riser which is the smallest in diameter is also made of steel increasing its strength and permitting the 5/8" Baby Pin to be welded directly to the riser instead of being pinned.

Matthews Studio Equipment 40 inch C Stand with Grip Head and Arm

The Matthews Studio Equipment 40 inch C Stand with Grip Head and Arm is a stable light stand almost ubiquitous in production environments.
Maximum Height: 126.5" (321cm)

• Minimum Height: 53" (126cm)
• Capacity: 22 lbs (10kg)
• Weight: 16 lbs (7.2kg)
• Footprint: 27.5" (70cm)
• Folded Base: 21" (54cm)

Matthews Studio Baby Jr. 2 Rise Roller Stand

The Matthews Studio Equipment Baby Jr. 2 Rise Roller Stand is for small fixtures which require a 5/8 in mounting pin. This stand has steel legs and riser. The tripod brace base, with all axis locking casters provides great stability.

American Grip Apple Box

We offer a wide selection of apple boxes including full apple, half apple, quarter apple, pancake (eighth Apple), and more. The American Grip Apple Box is a versatile, essential tool for film and studio production.

The Baby Pipe Clamp fastens to pipes with diameters of 0.39 to 2.16". It has a 5/8" mounting stud and a load capacity of 220.46 lb (100 kg). A safety cable is included. pipe Clamps have a uniquely designed hook that keeps the clamp on the pipe even with a light fixture attached.

Also known as Baby Nail-On. A steel plate with a Baby (5/8") Pin welded to it and holes drilled in each corner for screwing or nailing to a set wall or studio floor. On the East Coast these are often referred to as 750 or Baby Pigeons.

The American Grip 4 foot Dolly Track is Round Straight 4ft, weight 23.5lbs made of chrome plated steel.

The American Grip 8 foot Dolly Track is a Round Straight 8ft, weight 30.5lbs made of chrome plated steel.

The Bead Board Holder, also known as quacker/duckbill/platypus/onky-bonk/lips, is the best way to secure bead board in a stand. Vise grips with oversize jaws and a 5/8" diameter stud for mounting in a grip stand.

This Drop Ceiling Cable Hook will easily rig on to ceiling rails and frames for your hanging needs. A screw with handle allows you to adjust the width of the scissor clip for easy installation as well as for fitments. 

Jaws right at the base of the baby pin for more stable mounting of heavier lamps, etc. Knob and one jaw are removable on this clamp. Same jaws & pads as 2E.

Center Jaw Cardellini Clamp Specifications

• Jaw width: 3"
• Jaw capacity: 2"
• Shaft length: 7"
• Weight: 20 oz.

The End Jaw Cardellini Clamp features patented design jaws on one end and baby pin on the other. Slips into tight spaces for mounting lights. Grabs a multitude of shapes. Secure griping with replaceable rubber jaw pads. Good for grabbing objects which are then mounted in a C-stand.

End Jaw Cardellini Clamp Specifications

• Jaw width: 3"
• Jaw capacity: 2"
• Shaft length: 7"
• Weight: 20 oz. 

The Gator Grip (gator clamp) is the same as a Gaffer Grip; a clamp with a jaw equipped with 12 rubber gripping pads that protect the surface being clamped and provide greater clamping ability.

The 2-1/2" Grip Head (aka gobo head) is without a doubt, the most used piece of grip equipment used by grips for film, Digital, still, and video shoots. It's an indispensable tool of the trade. Grip Heads feature two holes of 3/8" and 5/8" diameter and castings that offer positive lock in all directions.

The Junior to Baby Pin Adapter fits into heavy duty aluminum or steel light stands with combo heads or the turtle base of a C-Stand and can be used with other grip accessories as a baby or junior stud. Either end of the adapter will allow use of lights or accessories with baby or junior receivers.

With a padded grip surface and a unique design combining one flat and one v-notched jaw, Mafer Clamps are used to attach fixtures and equipment to a variety of irregular surfaces including furniture.

Manfrotto Variable Friction Magic Arm

The Manfrotto Variable Friction Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening for safe and precise positioning of a light head or camera. It has 5/8" studs on ball joints at both ends with 3/8 and 1/4" female threads. It requires a Super Clamp or Base (available separately) for use.

Sandbags are made of 1000 denier Black Textured Nylon with a water resistant polyurethane coating on the inside, triple sewn with a safety strip at the bottom. Sand is encapsulated in a 3 mi poly inner bag, which is heat sealed. Sandbags are manufactured with both a carry handle and a butterfly handle of polypropylene webbing.