Lectrosonic SMWB Digital Hybrid Wideband Transmitter, SM Series Single AA version. B1 Freq 537.600-614.375
To meet the demand for both extended operating range and extended battery life, the “WB” series SM transmitters offer selectable output power of 25, 50 and 100 mW. With higher power output, the operating range is improved at the expense of battery life. When range is not an issue, a lower power level can be used to extend the battery life.
The transmitters offer hands free setup and adjustment using audible tones. They can be put to sleep to conserve battery power during setup while buried inside costuming, then awakened for normal operation when the production begins. Other features include input gain adjustment in 1 dB increments over a 44 dB range and adjustable low frequency audio roll-off for 3 dB down points at 35, 50, 70, 100, 120 or 150 Hz to control subsonic and very low frequency audio content.
The Lectrosonics SMWB & SMDWB at Talamas
Nick and Mike explain how the new wave of wireless transmitters from Lectrosonics can have a big impact on your productions. We eat, breath and sleep wireless audio, so we're just a little thrilled to offer them in our sales and rentals lineups.
The Lectrosonics SMWB and SMDWB transmitters solves the issues of finding a open RF frequency to transmit on and having a portable recorder for your talent to wear.
The DSP-based design works with all Digital Hybrid receivers, and is backward compatible for use with Lectrosonics 200 and 100 Series, IFB receivers and some analog receivers from other manufacturers in addition to its native Digital Hybrid Wireless® operating mode.
The input section features the unique Lectrosonics servo bias input circuitry with a standard TA5M type jack for use with electret lavaliere mics, dynamic mics, or line level signals. A DSP-controlled analog audio limiter is employed ahead of the first mic preamp to protect the entire audio chain from overload. The limiter has a range of more than 30 dB for excellent overload protection, and a dual release envelope that makes the limiter acoustically transparent while maintaining low distortion of brief transients and longer duration peaks.
A water resistant control panel with LCD, membrane switches and multi-color LEDs make input gain adjustments, frequency and compatibility mode selection quick and accurate. The battery compartment accepts lithium AA batteries.
The SMWB housing is machined from solid aluminum blocks to provide an extremely lightweight and rugged package. A special non-corrosive finish resists salt water exposure and perspiration in extreme environments.
Alternate Recording Function
Instead of transmitting, the SMWB may also be used as a recorder. The industry standard .wav (BWF) file format is compatible with essentially any audio or video editing software.
NOTE: The transmitting and recording functions cannot be done simultaneously. Users must choose to transmit or record.
Frequency Tuning Range
RF-intense multichannel and mobile venues must have a broad selection of frequencies available to alleviate interference problems, especially with the emergence of DTV telecasts. 3072 frequencies are selectable in 25 or 100 kHz steps across the broad tuning range of each frequency band.
• Selectable output power to maximize battery life or operating range
• Ultra-lightweight, corrosion resistant housing
• Water resistant seals for use in damp environments
• LCD interface with lockout option
• Programmable compatibility modes for use with a wide variety of different receivers
• Servo Bias input circuitry
• IR (infrared) port for fast setup
• Covers 3 standard frequency blocks
• Update firmware in the field via Micro SD card reader
• Alternate use as recorder on internal microSDHC memory card