Lectrosonics MC55 IFB Camera Interface

Product

Details

Audio interface cable intended to connect an IFBR1, IFBR1a, IFBR5, or UCR100 receiver to a video camera or other recording device with XLR input and is configured for balanced mode.

Lectrosonics 15 inch audio output cable for IFB1Ra receiver; right angle 3.55mm mini-plug to balanced XLR male; DC bypassed, 45 dB attenuation for mic level inputs.

Included

Lectrosonic MC55, 15 INCH, IFB Camera Interface

Specs

Length: 15 inches (38 cm) Receiver connector: 3.5 mm right angle plug (mini-phone) with tip and sleeve. Camcorder connector: XLR male (balanced, DC isolated) Attenuation: 45 dB (approx) Output Impedance: 600 ohms or greater

Wiring Connections: Mini-plug sleeve (cable shield) to XLR pin 3 through a 10uF capacitor and a 4.64k ohm resistor. Mini-plug tip (cable center conductor) to XLR pin 2 through a 10uF capacitor and a 4.64k ohm resistor. 100 ohm resistor from XLR pin 1 to 2. 100 ohm resistor from XLR pin 1 to 3.

Resources

Lectrosonics

Lectrosonics MC55 IFB Camera Interface

MPN:

Product