Skip to main content
Manufacturer
IFBlue IFBR1C-VHF IFB Receiver
MPN: IFBR1C-VHF

Call for Availability

800.941.2446

Product Details

IFBlue IFBR1C-VHF IFB Receiver

Batteries Included

Description

IFBlue IFBR1C-VHF IFB Receiver

  • Compatible with Lectrosonics Digital Hybrid and IFB transmitters
  • Stores up to 10 frequency presets in memory
  • LCD interface for programming and operation
  • High sensitivity for extended operating range indoors or outdoors
  • USB port for firmware updates
  • Compact, rugged injection molded ABS housing
  • Attached battery door
  • 2 AA batteries; alkaline, lithium, or NiMH rechargeables (supplied)

Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio during a production. The IFBR1C receiver provides simplicity and flexibility in a package that is intuitive for untrained users to operate. In spite of its tiny size, the new IFBR1C receiver offers excellent performance on par with all of Lectrosonics’ IFB products. The design uses +/-20 kHz FM deviation for efficient use of the bandwidth, with compandor noise reduction circuitry for an excellent signal to noise ratio. A supersonic Pilot Tone signal controls the audio output squelch to keep the receiver silent when no transmitter signal is received. The incoming RF signal is filtered and amplified, then mixed down to the IF frequency with a microprocessor controlled synthesizer. If a monaural earpiece is connected, this condition is automatically accommodated, with no loss of audio output power or battery life. Full output power is available with either type of connector, without the power losses that result from a resistive circuit design. The headphone cable doubles as the receiving antenna. The receiver will drive a wide variety of earbuds, headphones and induction neck loops at substantial levels, with loads from 16 Ohms to 600 Ohms. The IFBR1C operates on two (2) double A batteries. The LED indicator changes color from green to red as the battery voltage declines to provide plenty of warning before operation ceases. Inside the battery door is a USB port for firmware updates in the field. The IFBR1C is housed in a rugged, injection molded ABS package. A belt clip is included and provides a secure mounting on a wide variety of belts, pockets and fabrics.

Product Specification

Operating Frequencies (MHz):

Block VHF
Frequency Selection Steps: 25 kHz; VHF: 125 kHz
Sensitivity: 1 uv (20 dB SINAD)
Signal/Noise ratio: 95 dB A-weighted
Squelch quieting: 90 dB AM rejection: 50 dB, 10 uV to 100 mV
Modulation acceptance: ±20 kHz
Spurious rejection: Greater than 70 dB
Operating temperature range: -20 to 50 degrees C. Third order intercept: 0 dBm
Frequency response: 100 Hz to 10 kHz, (+/-1 dB)
Audio output: 1V RMS into 50 ohms minimum
Antenna: Headphone cable Min. headphone impedance: 16.0 Ohms
Programmable memory: 10 frequencies can be stored as presets
Controls: Top Panel: Single knob controls Audio Output Level and Power On Side Panel: Membrane switches with LCD interface for Frequency Selection and Preset function
Indicators: Multi-color LED indicator for power on and battery status
Battery: Two AA batteries (+1.5 VDC each)
Battery Life: 10 hours (Alkaline), 12 hours (NiMh), 20 hours, 40 minutes (Lithium)
Current consumption: 120 mA Weight: 4.6 oz (130 g) with batteries
Size: 2.8 x 2.4 x 0.8 in. 108 x 70.0 x 28.5 mm
Specifications subject to change without notice

IFBlue IFBR1C-VHF Manual

Download

IFBlue IFBR1C-VHF Manual

Download

IFBlue IFBR1C-VHF Manual

Download