Call for Availability
800.941.2446
BS410 Wideband Two Channel Base Station
Four BP410 Beltpacks with Eight BAT50 Batteries
Five CC-15 Single Sided Noise Canceling headsets
AC 50 Battery Charger.
Antennas and Power supplys
The DX410 is a Two Channel Full Duplex wireless system which supports up to 15 registered BP410 beltpacks and/or WH410 all-in-one wireless headsets. The system operates in the 2.4GHz frequency band and features high quality 7kHz wideband audio. The BS410 allows the option for audio bridging by combining 2-wire and 4-wire audio together on A or B channels.
BS410 Base Station Features
Two-channels
7kHz wideband audio
2-wire and 4-wire bridging
2-wire auto-nulling
Lost packet concealment
Upgraded radio
Supports up to 15 beltpacks and/or wireless headsets
BP410 Beltpack
The BP410 is a rugged, light-weight, beltback to be used with the BS410 base station. Single-channel operation allows any four beltpacks and/or the WH410 wireless headset to engage in simultaneous, full-duplex communication. In dual-channel operation, three users may be in full-duplex with up to 13 additional users in listen-only mode. The BP410 has a rugged, over-mold, reinforced casing and long-lasting keypads with no mechanical switch. The BAT50 Li-Ion battery, has up to 12 hours of battery life.
BP410 Beltpack Features
Two Channel
7kHz wideband audio
Up to 15 Beltpacks and/or all-in-one handsets on a single system
Single or dual-channel operation
Up to 12 hours of battery life
Audio
Channels: 2 audio channels
Capacity: Up to 15 BP410 and/or WH410 per base station
Full-Duplex: Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex.
Radio Frequency Range: 2400 – 2483.5 MHz
Audio Frequency: 200 Hz – 7kHz
4-wire I/O: RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire
2-wire I/O: XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50dB attenuation, typical
Aux Input: XLR-3F with ¼” (6.35mm) combo jack, 600 Ohms balanced, level adjustable
Aux Output: XLR-3M, 600 Ohms balanced, level adjustable
Headset Connector: 4-pin mini-DIN, Electret microphone
Headset Output: 200mW into 32 Ohms
Antenna Type: External ½-wave dipole (R-TNC connector), RX/TX horizontal/vertical diversity
System Distortion: <2%
Communication Security: 64-bit encryption, dual-slot diversity
Transmitter
Type: Frequency Hopping, Spread Spectrum (FHSS)
Transmit Power: 100mW burst
Modulation Type: Gaussian filtered FSK, TDMA
Frequency Stability: 13 ppm
Harmonics/Spurious: Exceeds FCC and ETSI specifications over temperature
Receiver
Type: Frequency Hopping, Spread Spectrum (FHSS)
RF Sensitivity: <-90dBm w 10-3 BER
Frequency Stability: 13 ppm
Distortion: <2%
Power Requirements:
100 – 240 VAC, 50 – 60 Hz or 12 – 14 VDC
Environmental:
Temperature: +32°F - +122°F (0°C - +50°C)
Dimensions
1.75 x 19.0 x 17.13 in
(44 x 483 x 435 mm) (HxWxD)
Weight
9 lbs (4.1 kg)