The Beachtek DXA-4 (DXA-4P) Dual XLR Input to 1/8" Stereo Mini Output Adapter allows you to attach two balanced XLR audio devices to your camcorder. Each input signal is sent to a MIC/LINE switch to allow you to set the proper level, then to an audio control to adjust attenuation. The balanced input signal is then converted to an unbalanced output through an impedance matching transformer. Finally, the output signal is sent through an attached shielded cable terminating in a stereo mini-plug…

The BeachTek DXA-5Da is a two-channel, transformer balanced XLR adapter for attaching external microphones and other audio gear to any DSLR camera that has a built-in mic jack. It can also be used with any camcorder or other audio recording device that has a mic jack. The The BeachTek DXA-5Da uses high quality balancing transformers, which are completely noise free for superb audio. The The BeachTek DXA-5Da is very easy to set up and use. It allows you to connect a wide variety of audio…

The BeachTek DXA6A is a two channel, transformer balanced XLR adapter with built-in 48 volt phantom power supplies. This adapter is designed to easily attach two professional, balanced microphones or wireless systems to the Sony VX and FX series of camcorders. The Beachtek DXA6A gives you all the benefits of using balanced audio devices for clean audio as well as control over the signal levels to ensure the best possible sound recording.

The Beachtek DXA6A is very easy to set up and…

The BeachTek DXA-2s is a two channel, transformer balanced XLR adapter for today’s small, compact camcorders. This adapter is designed to easily attach balanced or unbalanced type microphones to any camcorder with a MIC jack. The DXA-2s gives you all the benefits of using balanced audio devices for clean audio as well as control over the signal levels to ensure the best possible sound recording.

The Beachtek DXA2S is very easy to set up and use. Its rugged construction ensures years of…

The Beyerdynamic DT109 Double-Muff Headset is the worldwide headset standard for live, remote broadcasting, studio, film, TV and language lab applications. Highly sensitive headphone and microphone transducers. Excellent ambient noise attenuation. Capable of handling very high SPL. Rugged construction. Excellent comfort for long-term wearing. Modular construction for easy servicing. Available for Clearcom and RTS systems.

…

The Beyerdynamic Microphone Stand with Boom is a height adjustable tripod microphone stand with telescoping boom. The stand features a scratch resistant finish and is adjustable in height between 35 to 63".

The COMTEK Mini-Mite 216 is a 1/2 wave antenna for use with the BST-25/216 and M-216 Option 7 transmitters. It is ideal for use on sound carts for location sound operation and is a more convenient alternative to the traditional Phase Right Antenna. Because the Comtek Mini-Mite 216 utilizes 1/2 wave technology, it does not need to have an antenna ground and can be mounted to metallic or non metallic sound carts using a standard mic stand mounting flange. The total length of the wire whip…

The Countryman B3 Red Band captures the highest-quality audio available in a lavalier mic, with field-selectable HF response caps and extremely low handling noise. Whether you need a tie-clip lav for an interview, a hair-hidden mic for drama, a water-resistant mic for water sports or hurricane reporting, or simply a small mic to hide in a prop flower vase, you'll never run out of applications for Countryman's B3 lavalier. Kevlar protects its cable from excessive weight and stretching, and…

The Countryman EMW Omnidirectional Lavalier Microphone is designed to reproduce vocals, musical instruments and ambient audio sources with pristine detail and minimal handling noise. The capsule is highly resistant to moisture making it a suitable solution for outdoor use, placement against skin, etc.

Clear audio reproduction with low rubbing and handling noise is a result of the EMW's omnidirectional polar pattern. The shelved frequency response features a smooth +6dB boost between…

Only one tenth of an inch (2.5 mm) in diameter, the Countryman B6 Lavalier Microphone outperforms microphones many times it's size. The Countryman B6 features replaceable protective caps that can change its color and frequency response to match your application. Designed to survive, it's highly resistant to moisture, makeup and other hazards found in a production environment. Easily Hidden Smaller than the cable of other lavaliers, the Countryman B6 is effectively hidden when it's in plain…

Perfect on stage or in church, the Countryman E6 Omnidirectional Earset Microphone is the answer when you need the highest possible sound quality without the bulk and appearance of conventional headsets. Light and springy, the Countryman E6 clips around your ear, not around your head. They never interfere with your hairstyle, headphones or hat. The Countryman E6 is available in three colors, Light Beige, Cocoa, and Black to blend with the user's appearance. The E6 is supplied with your…

Crown's PZM (Pressure Zone Microphone) Series are omnidirectional boundary microphones. They can be placed on a large surface such as a table, floor, wall, or lectern. The Crown PZM 6RB Pressure Zone Microphone prevents phase interference from surface reflections, allowing a wide, smooth response. Microphone sensitivity is boosted 6 dB by the surface mounting.

The Crown PZM 6RB microphone lets the user optimally place microphones in the performance venue. Designed for use on flat…

Crown's PCC Series Phase Coherent Cardioid microphones are unidirectional boundary microphones that offer exceptional acoustic performance in handsome, low-profile enclosures. The Crown PCC160 is the industry-standard stage floor microphone, while the other models provide an elegant solution for discrete multi-mic applications such as lecterns and boardroom tables as well as altar, teleconferencing and distance-learning applications.

Each PCC Series microphone employs Crown's Phase…

Recording studios, broadcast facilities, sound reinforcement engineers, musicians, and sound contractors alike will find that the straightforward design and versatile signal control options make the DBX 3231L Dual 1/3 Octave Graphic Equalizer a powerful audio tool.

DBX 3231L Graphic Equalizer Features

• 31 ISO standard center 1/3 octave constant Q frequency bands
• Variable high pass and switchable low pass 12dB/octave filters
• Electronically balanced inputs,…

The Denecke PS-1 48v Phantom Power Supply feeds a microphone signal to DAT recorders, radio mics, tape machines and mixers. Compact, rugged, lightweight and very low noise. Automatic power on and off. LED indicator blinks for turn on and off, and will remain on to indicate low battery. Internal -15dB pad switch. Operates from a single 9V alkaline battery.

The Denecke Dcode SB-T Time Code and Video Sync Generator reads, generates and jams to all the standard frame rates including 23.976 for High Definition Video. The outputs include Time Code and Video Sync in PAL and NTSC, as well as Trilevel for HD shoots. The Temperature Compensated Crystal Oscillator (TCXO) ensures low drift. High stability and ease of use makes it a welcome addition to any Hi Def or Standard Def shoot!

Denecke Dcode SB-T Time Code and Video Sync Generator Features…

The DPA d:fine FIO Omnidirectional Headset Microphone has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting securely and hardly visible. Just by rotating the boom and the earhook, the microphone can be moved from left to right ear, or into the optimum position.

Staying true to the DPA legacy, the DPA d:fine FIO Omnidirectional Headset Microphone offers accurate, natural voice intelligibility and very high SPL…

Perfect for PA amplification and live recording of acoustic upright bass, the DPA 4099B Clip Instrument Microphone offers a sound that is considerably more natural than an internal microphone or pick-up as well as several excellent placement possibilities. The DPA 4099B is a unique clip microphone inheriting the sonic approach from the legendary DPA studio microphones to a new instrument microphone. The DPA 4099B microphone and mounting system is meticulously designed and optimized for the…

The DPA d:fine FID Directional Headset Microphone has been ergonomically designed to fit easily and seamlessly. It will adjust to fit any ear size and head shape while mounting securely and hardly visible. Just by rotating the boom and the earhook, the microphone can be moved from left to right ear, or into the optimum position.

Staying true to the DPA legacy, the DPA d:fine FID Directional Headset Microphone offers accurate, natural voice intelligibility and very high SPL capabilities…

The DPA 4099P Stereo Microphone System is a piano miking solution that makes it easy to achieve a high level of isolation on stage while providing clean and transparent stereo sound quality with realistic dynamics. The DPA 4099P is a complete system which includes a pair of sensitivity selected 4099 microphones on goosenecks with magnetic mounts to allow the most realistic capture of a piano.  With its low profile and unobtrusive design it is perfect in closed lid scenarios for capturing…

Perfect for PA amplification and live recording of a cello, the DPA 4099C Clip Instrument Microphone offers a sound that is considerably more natural than an internal microphone or pick-up as well as several excellent placement possibilities. The DPA 4099C is a unique clip microphone inheriting the sonic approach from the legendary DPA studio microphones to a new instrument microphone. The DPA 4099C microphone and mounting system is meticulously designed and optimized for the violoncello.…

Soprano, alto, tenor or baritone, the DPA 4099S Clip Instrument Microphone fits them all, providing exceptional gain-before-feedback and a broad spectrum of uncompromised tonal possibilities depending on the microphone placement. The DPA 4099S is a unique clip microphone inheriting the sonic approach from the legendary DPA studio microphones to a new instrument microphone. The 4099 microphone and mounting system is meticulously designed and optimized for the saxophone family. This is to…

Violin, banjo and viola players will appreciate how gently the DPA 4099V Clip Instrument Microphone adheres to a prized instrument while its elegantly lightweight, unobtrusive design keeps it from getting in the way of a passionate performance. The DPA 4099V is a unique clip microphone inheriting the sonic approach from the legendary DPA studio microphones to a new instrument microphone. The DPA 4099 microphone and mounting system is meticulously designed and optimized for the string family…

The DPA 4066 is a headband mounted condenser microphone. The DPA 4066 Miniature Omnidirectional Headset Microphone uses a prepolarized omnidirectional cartridge element with a 5.4mm vertical diaphragm. It is specially designed for maximum performance under the often difficult conditions when mounted directly on the human body. The band is easily bent to fit any head shape, in a tight fixed position.

Special attention has been paid in the design to the humidity problems that often occur…

Combining high audio quality and low visibility, the DPA 4080 Cardioid Microphone Element is well suited for broadcast, conference, and other live performances in the studio or in the field. It is acoustically pre-equalized, offering a 4 dB presence boost, which makes the voice more distinguishable and improves speech intelligibility. Professionals will appreciate the light weight and the excellent speech reproduction.

…

The DPA 4099 Microphone for Instrument Miking offers a broad spectrum of uncompromised tonal possibilities depending on the microphone placement. Representing years of research and development, the DPA 4099 condenser microphone feature supercardioid polar patterns for superior gain-before-feedback. Fully capable of handling any saxophone’s dynamic range and fine-grained timbre, these microphones live up to their pedigree with sound as accurate as DPA’s other world-class microphones.

…

Originally designed for use with wireless systems in theater, television and close-miked instrument applications, the DPA 4060 capsule is highly unobtrusive. Because of their small size, these tiny condensers exhibit an exceedingly accurate omnidirectional pattern and therefore do not need to be aimed directly at the sound source to achieve quality pickup. Excellent speech and vocal mics, DPA miniatures are de facto theatre standards. Musicians and engineers use them as live or studio…

The SE5 adapter ensures perfect mechanic fit and electronic optimization to Sennheiser 5200 series wireless bodies. The DPA d:facto II supercardioid mic head can be used with various transmitters using original DPA adapters. With unsurpassed capsule perfection, three-stage pop protection grid, perfect shock mounting and electronics handling high voltage from the capsule; the d:facto II sounds extremely dynamic and distinct. It is not necessarily set to be a wireless mic, since the adapter…

An outstanding speech and vocal mic, the DPA 4071 Omnidirectional Low Sensitivity Microphone Element will make your voice heard and intelligible. Use it for all ENG/EFP and even applications which require small microphones that are resistant to moisture, extreme temperature change and humidity.

When recording voices from mic placement on a performer's body, no frequency below 100 Hz is attractive. For this reason, an acoustical low-cut has been incorporated in the DPA 4071 capsule so…

The DPA d:facto is a high quality stage vocal microphone with extraordinary natural sound, high separation from nearby sound sources and extreme sound level handling. The DPA d:facto II's supercardioid pattern and superb definition gives high separation and true sound color on stage, equally suitable for PA amplification and recording. A robust three-stage pop protection grid built into the microphone removes unwanted noise.

The d:facto II provides improved audio performance as it is…

Originally designed for use with wireless systems in theater, television and close-miked instrument applications, the DPA 4061 capsule is highly unobtrusive. The DPA 4061 is acoustically identical with the 4060, but the sensitivity is adjusted to match some of the more sensitive transmitters on the market. Because of their small size, these tiny condensers exhibit an exceedingly accurate omnidirectional pattern and therefore do not need to be aimed directly at the sound source to achieve…

By using original DPA adapters, the d:facto II supercardioid mic head can be used with a variety of other transmitting products. The SL1 adapter ensures perfect mechanic and electronic fitting to wireless systems. With unsurpassed capsule perfection, a three-stage pop-protection grid, perfect shock mounting and an electronic design handling high voltage from the capsule; the d:facto II sounds much more dynamic and distinct than any other wireless, even with entry level systems. The…

The DPA 4099D High SPL Clip Instrument Microphone is a microphone solution that allows for high quality audio capture of drums and percussion instruments. The low profile and unobtrusive design provides visual elegance along with uncompromised sound quality and accurate dynamics.
The unique and flexible clip-on system provides fast, stable and repeatable positioning. The mics can be easily positioned at different angles via the flexible gooseneck to fit different drums and allow a…

The DPA 4088 is a miniature cardioid headband built on the finest DPA experiences in microphone design and manufacturing, providing the best sounding directional headworn microphone available today for performing talent of various sorts. Open, natural and reliable are the most describing words for this microphone. The high quality of the microphone itself means, that you will hear the sound of the voice right away - not the microphone. In acoustically demanding live performance environments…

The DPA 4099U Universal Clip Instrument Microphone is a microphone system especially designed to address the unique mounting challenges of slim bodied and unusually shaped instruments such as oboes, clarinets, bassoons, recorders and flutes.  It allows for high quality audio capture while the low profile and light weight of the unobtrusive design provides visual elegance along with uncompromised sound quality.

The creative design of the unique microphone clip includes a hook-and-loop…

The DPA 4081 Supercardioid Miniature Microphone is a high quality directional condenser microphone primarily intended to use for ultra-low profile, discreet recordings in the field or as all-round microphone for instrument miking. Each DPA 4081 is a complete, integrated system combining microphone, windscreen, shock mount and cable management system.

DPA 4081 Supercardioid Microphone Element Features

• Ultra-low profile field recording
• All-round instrument miking…

An ideal tool for trumpet, trombone and other brass instruments, with or without mute, the DPA 4099T High SPL Clip Instrument Microphone effortlessly handles even the highest sound pressure levels. Its innovative mounting mechanism makes it easy to move the mic between instruments with only one hand. The DPA 4099T is a unique clip microphone inheriting the sonic approach from the legendary DPA studio microphones to a new range of instrument microphones. The 4099T microphone and mounting…

Perfect for PA amplification and live recording of acoustic guitar, mandolin, ukulele and dobro, the DPA 4099G Clip Instrument Microphone offers practically unlimited placement possibilities as well as a sound that is considerably more natural than an internal microphone or pick-up. The DPA 4099G is a unique clip microphone inheriting the sonic approach from the legendary DPA studio microphones to a new instrument microphone. The 4099 microphone and mounting system is meticulously designed…

The DPA 4066 is a headband mounted condenser microphone. The DPA 4066 uses a prepolarized omnidirectional cartridge element with a 5.4mm vertical diaphragm. It is specially designed for maximum performance under the often difficult conditions when mounted directly on the human body. The band is easily bent to fit any head shape, in a tight fixed position.

Special attention has been paid in the design to the humidity problems that often occur in theatrical applications and to the light…

Full Duplex Wireless Communication Without A Base Station

When your job calls for split second coordination look to UltraLITE self contained headsets and for hands free, full duplex wireless voice contact.

UltraLITE are revolutionary headsets that eclipse all other full duplex systems for performance and convenience because the transceiver is built right inside the ear cup. This self-contained, “All in One” design…

The Electro-Voice RE50 is a specially shock-isolated, omnidirectional, dynamic microphone. An advancement in shock-mounting techniques, they were designed particularly for hand-held broadcast and sound reinforcement use. All handling noises, clothing noises, and even cord shock have been isolated from the microphone element so that mechanical induced noise is greatly reduced. By use of a high-mass zinc internal acoustic chamber, shock-mounted within the machined aluminum outer casing, the…

The IDX JL2 Plus 2-Up Fast Charger is a sequential 2 Channel battery charger for Lithium Ion and Nickel Cadmium NP batteries in any combination, with a 60W DC 13.8v XLR power supply. Please note CA4XLR power supply cable is now included.

IDX JL2 Plus 2-Up Fast Charger for NP-type Batteries Features

• Quick charge current : All IDX NP-L and Endura type Li-ion batteries: 2.3A. All IDX Ni-Cd batteries: 1.9A.
• Input Voltage : AC100-240V 50/60Hz
• Dimensions : 5.94(W…

JuicedLink JL-DT454 DSLR Camera Microphone Preamplifier Features

• 4 microphone channels (2 XLR, 2 unbalanced)
• Low-noise preamplifiers
• 30dB low-noise max gain (single-ended, stereo)
• Headphone Amplifier
• Playback Monitor
• 48V Phantom, plus 12V power saving mode

Meters

• 4 segment LED (each right/left)
• 2 sensitivity settings; adjustable
• Meters valuable with the new 5D 2.0.4 firmware, which does not show…

We rent both cabled and uncabled K tek boom poles in 6', 9' and 11' lengths.

KM-26 Tactical kits combine the Klover MiK 26 Tactical parabolic microphone with the most commonly used accessories and a waterproof case to protect the entire package. 

Any one of these kits will provide everything you need to begin capturing audio from distance you never dreamed were possible.

The Klover MiK 26 Tactical parabolic microphone (KM-26-TE) is packaged with the accessories listed below:

• Sound Devices MM-1 amplifier
• Sennheiser…

The Lectrosonics SR wireless microphone systems includes the SR dual channel, drop in wireless receiver and two UM400a wireless transmitters. The appropriate connector kit for your camera is included with the rental.

Lectrosonics SR Wireless Receiver Features

The Lectrosonics SR receiver offers two independent channels and fits into the standard video camera slots found on professional cameras. The two audio channels can feed separate inputs or can be mixed internally to feed a…

Lectrosonics UM400a Wireless Transmitter Features

The Lectrosonics UM400a implements the latest Digital Hybrid Wireless technology in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low impedance dynamic mics, electret lavalier mics with positive or negative bias and line level inputs. Input gain is adjustable over a 43 dB range to perfectly match the audio input level for optimum modulation, minimum distortion and maximum signal to noise ratio.…

The Lectrosonics UM400a implements Digital Hybrid Wireless technology in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low impedance dynamic mics, electret lavalier mics with positive or negative bias and line level inputs. Input gain is adjustable over a 43 dB range to perfectly match the audio input level for optimum modulation, minimum distortion and maximum signal to noise ratio. Input levels are accurately indicated by two LEDs on the control panel…

Lectrosonics UCR411a Wireless Receiver Features

An industry first, the Lectrosonics UCR411a, with its proprietary combination of digital audio and analog RF provides the superb audio quality of a pure digital system and the outstanding operating range of the finest FM wireless systems. The digital audio chain eliminates a compandor and its artifacts, and provides audio frequency response flat to 20 kHz. The RF link takes advantage of the spectral efficiency characteristics of…

Lectrosonics UH400A Plug on Transmitter Features

The UH400A is a digital hybrid synthesized UHF plug-on transmitter compatible with all receivers in the 400, 200 and 100 Series product groups. The DSP-base design allows the transmitter to operate in its native Digital Hybrid Wireless mode, or in several alternate modes that are compatible with analog receivers. A unique multi-voltage phantom power feature allows the transmitter to be used with any microphone, including high current…

Lectrosonics SMQV Wireless UHF Beltpack Transmitter Features

• Variable, selectable power output:
• 50, 100, 250mW output power
• Membrane switch control panel with LCD display
• 256 synthesized UHF frequencies
• Wide input dynamic range
• DSP based pilot-tone signal
• Circulator/Isolator output stage
• Splash-proof, machined aluminum housing
• Non-corrosive, superhard finish 

…

Lectrosonics Venue Wireless Receiver Features

The Venue wireless receiver system is a modular UHF design that operates with Digital Hybrid Wireless™ transmitters, and a variety of analog transmitters. It consists of a Venue Receiver Master (VRM) and one to six plug-in receiver modules. The VRM includes an antenna multi-coupler, computer communications interface and the mechanical rack mounting for the receiver modules.
 

The VR’s design offers a tremendous degree of…

The Lectrosonics Venue 2 Modular Receiver is a solution that effectively deals with a congested RF spectrum with a variety of options that allows a system configuration to be idealized for a particular installation or application.
Flexibility is the core concept of the design.

The receiver modules can be operated separately, each with switched diversity reception for a total of six audio channels, or operated in pairs for more robust diversity reception with one audio channel…

Lectrosonics UCR411a Wireless Receiver Features

The Lectrosonics UCR411a receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful LCD interface, making the unit ideal for use in Quad Paks, on sound carts, in portable bags and in rack mount multi-couplers. To alleviate interference problems in an increasingly congested RF spectrum, an RF spectrum analyzer is…

The Lectrosonics LR Digital Hybrid Wireless receiver is the ideal single channel receiver for all ENG and DSLR video productions. It's compact size and light-weight body make mounting this receiver to a camera quick and simple. Tracking front-end filters block interference from high powered RF signals on nearby channels to preserve the extended operating range. RF spectrum scanning displays accurate results on the LCD to make finding clear spectrum quick and easy.

The LR uses the…

Lectrosonics UM400 Wireless Transmitter Features

The Lectrosonics UM400 implements the latest Digital Hybrid Wireless™ technology in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low impedance dynamic mics, electret lavalier mics with positive or negative bias and line level inputs. Input gain is adjustable over a 43 dB range to perfectly match the audio input level for optimum modulation, minimum distortion and maximum signal to noise ratio.…

Lectrosonics UCR411A Wireless Receiver Features

The Lectrosonics UCR411 receiver provides professional performance and a versatile feature set in a compact design for field and location production. All settings are made from the front panel with a powerful LCD interface, making the unit ideal for use in Quad Paks, on sound carts, in portable bags and in rack mount multi-couplers. To alleviate interference problems in an increasingly congested RF spectrum, an RF spectrum analyzer is…

The LT transmitter offers a full set of professional features in a compact, rugged package. The unit is compatible with all Digital Hybrid Wireless® receivers and even some from other manufacturers, making it comfortable in a wide variety of applications from video production to theater, stage and house of worship.

The LT can be configured to operate as a “one touch” device with a single power on/off switch on the top panel, or with full access to all operational parameters using…

The Professional Sound Corporation Universal Microphone Power Supply is capable of powering both 12 volt "T" (AB) microphones and 48PH phantom powered microphones. Included in the design is a three-way switchable high pass filter (0dB, -6dB, -12dB @100Hz) and a three-way switchable pad (0dB, -10dB, -20dB). A built in LED indicates battery condition upon power up ensuring trouble free field recording. The PSC Universal Microphone Power Supply contains an internal "T" power phase switch,…

PSC Universal Shock Mounts were designed to provide stable and noise free handling for a wide variety of microphones. Featuring a compact, concise design, they are constructed of lightweight aircraft aluminum and have a non-reflective black anodized finish. The two custom suspension bands provide a high degree of isolation from handling noise. The shock mounts can hold microphones with diameters up to 1.25" (32mm) ensuring that nearly any microphone may be utilized. Industry standard 3/8" x…

Considered the little brother to the RF MultiMax!, the PSC RF Multidual Wideband Antenna Splitter offers the same unmatched flexibility for antenna splitting in a one space rack mount design. The ​PSC RF Multi Dual 1x8 offers two sections of separate, active 1 x 8 splitters that can be used for splitting antenna feeds for wireless applications. Again, when used in various combinations, these sections and the combined BNC connectors, allow for some very flexible RF routing solutions. In…

The PSC RF Multimax Wideband Antenna Splitter offers unmatched flexibility for antenna splitting to wireless receivers.The PSC RF Multimax Wideband Antenna Splitter is built with six independent splitters that can be connected in a host of different ways. First, it contains two, 2 x 4 passive splitter/combiners that can be used to either combine up to four antennas or split one antenna four ways. Secondly, the PSC RF MultiMax contains four, separate, active 1 x 8 splitters that can be used…

The QSC K8 Active Loudspeaker is quite simply the new standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of speaker size.

…

The QSC KSub Dual 12 inch Active Subwoofer is a bandpass design, constructed of premium birch and includes high-quality, low-noise casters. The subwoofer features a threaded pole receptacle for a positive, wobble free connection to a threaded speaker pole (included). Daily rental rate is $50 when rented with other speakers.

Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Euroblock connector. In an installed application, multiple K…

The QSC K10 2-way 10 inch Active Loudspeaker is quite simply The New Standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of…

The QSC K12 2-way 12 inch Active Loudspeaker is quite simply the new standard in lightweight powered loudspeaker systems. Under the direction of Pat Quilter, QSC's team of amplifier engineers have created a new standard in Class D power modules unparalleled in the industry. Next, breaking from the traditional loudspeaker paradigm, every model is fitted with the identical 1.75" HF device (fullrange models) and woofers of the same high quality for unparalleled performance, regardless of…

Using only 48V phantom power, the Radial Engineering J48 is an active direct box that produces an exceptionally linear response that extends from 20Hz up to well above 40kHz. Low distortion of all types is achieved via a unique digital switching power supply that raises the internal operating rail voltage for added headroom and improved signal handling.

The Radial Engineering J48 is both feature-rich for studio and made tough to handle the road. This includes a -15dB input pad to tame…

The Rane AD 22d is a fully balanced two Input, two Output audio alignment Delay providing a range of 1.50 to 999.99 milliseconds on each Output. The Delay of each Output is independently adjustable in 10 microsecond and 1 millisecond increments. 24-bit audio converters provide excellent sound quality.

Each Output has two nonvolatile Memories (no batteries required), A and B, for easy access to previously stored Delay values. Remote Recall screw terminals on the rear accept external…

The RFVenue RF Spotlight Antenna is an innovative, patent pending UHF antenna design that excels in applications where wireless microphones will be used in a limited area. With one or more RF Spotlight units in the area of use, the user can create a local RF field- similar in effect to a soft spotlight in a dark theater. By intentionally designing the unit for reduced signal sensitivity yet a uniform, omnidirectional pickup pattern, the RF Spotlight can be within very close range of the…

Unlike ordinary “fin” type antennas, the RFVenue Diversity Fin incorporates polarization and space-diversity reception, and does it without noise-generating amplifiers, bias tees, and the usual maze of wires that crews have to deal with. Two feedlines from the Diversity Fin tm antenna easily attach “under the hood” and can be routed to any diversity receiver, or a combiner. The advantage of the Diversity Fin tm antenna is clear: Only one antenna module is needed for dropout reduced reception…

Cyclone, Medium premium windshield system for shotgun and short shotgun mics. Features grey 3D-Tex® material, “multi-suspension” with Lyre® Technology for transparent, category leading wind and shock isolation. Perfect for Sennheiser MKH 416, Schoeps CMIT 5 etc.

Main Benefits:

• Superb acoustic transparency - the open shell structure with no parallel surfaces greatly reduces room-tone effects & provides a clean frequency response;
• Massive wind…

The Rycote Softie Windshield with Softie Shock Mount provides both wind protection and shock mounting for your microphone.

The Sanken CS2 Shotgun Microphone captures distant sound with an amazingly rich and natural tone. A much longer gradient tube in a mic of this overall size boosts the reach and directivity within a standard length microphone. The Sanken CS2 Microphone achieves supersharp directivity with a 120mm (4.75”) long acoustic tube in a standard 250 mm (10”) length / 19mm diameter body. Optimum audio capture is achieved by means of the proprietary Sanken rectangular capsule, a unique and innovative…

The Sanken COS11 lavalier microphone was designed using the unique "Vertical Diaphragm Layout" which provides superb sound from a microphone so small it is almost invisible. The Sanken COS11 has perfect OMNI Directional polar patterns from 20Hz to 20kHz, and very natural sound from 50Hz to 20kHz.The frequency response is consciously adjusted to the human voice. Suitable for a wide range of applications including musical theatre,TV news studio, ENG, TV-movie outdoor shooting and even live…

The SuperCMIT defines a new type of shotgun microphone. Its directivity goes well beyond that of conventional shotguns, even those with long interference tubes. It offers completely new possibilities for the sound engineer.

Two Sound Options from Schoeps: The Super…

Unusually low coloration of off-axis sound since the pickup angles at low and high frequencies are kept reasonably similar to one another: At medium frequencies the directivity of the Schoeps CMIT 5U Condenser Microphone is higher than one would expect from a microphone of this length, while at high frequencies the pickup pattern is not as narrow as with long shotgun microphones. Thus in active scenes it is easier to cue the boom and keep actors ”on mike.” Schoeps sound quality makes the…

Schoeps MK8 Bi-Directional Figure 8 Capsule Features

The Schoeps MK8 is a true dipole transducer, operating with a single diaphragm. The main axis of its bidirectional pickup lies at right angles to its cylindrical axis, and is marked at 0° and 180° with a red and a black dot respectively. When M/S stereo recordings are made, the 0° axis faces to the left, as viewed from behind the microphone setup. The “8“ engraved on the top of the housing should be aligned on its side so as to…

Schoeps MK41 Condenser Microphone Features

The Schoeps MK41 is highly directional. Sound arriving from off axis is attenuated even more than with a cardioid. The pickup is ‘drier’ and less susceptible to acoustic feedback than any other Schoeps microphone type, provided that a loudspeaker is not located directly on the rear axis of the microphone.

Its directivity is highly independent of frequency, so that even sounds arriving off axis and reverberant sound are registered…

Sennheiser ME64 Cardiod Microphone Capsule Features

• Excellent directivity across whole frequency range
• Very good feedback rejection
• Effective rejection of incidental rear noise
• High speech clarity
• High maximum sound pressure level
• Wide frequency range
• Integrated pop filter

The Sennheiser ME64 is a cardioid microphone capsule designed for use with the K6 and K6P powering modules. It has a very wide range of applications…

Sennheiser EM3032 Wireless Receiver Features

The Sennheiser EM3032 consists of two complete true diversity receivers in a single 19" 1 U rack housing. 32 programmable receiving frequencies per receiver ensure flexible channel selection and make this receiver an ideal choice for OB van applications or for use in shows.

• 2 true diversity receivers, 19" 1 U housing
• Integral antenna splitter, 2 x 1 : 2
• 32 programmable receiving frequencies per receiver
• …

The Sennheiser MKH8050 super-cardioid shotgun microphone will give higher attenuation of off-axis sound from the side than its cardioid sister model. It is best suited in situations where the requirements for lateral acoustic separation are higher. The MKH8050 is a great choice for recording soloists with large instruments and orchestra settings, as it provides absolute acoustical separation of instruments.

Sennheiser NB2 Headset Mic Adapter Features

The Sennheiser NB2 headset microphone adapter is designed for the unobtrusive attachment of MKE 2 or MKE 102/104 clip-on microphones. The microphone cable is easily inserted into the flexible construction of the adapter. The headmic adapter together with the clip-on microphone make an almost invisible head-worn microphone which gives complete freedom of movement in any application where you need both hands free.

• Excellent speech…

Sennheiser EM 3032 Wireless Receiver Features

The Sennheiser EM 3032 consists of two complete true diversity receivers in a single 19" 1 U rack housing. 32 programmable receiving frequencies per receiver ensure flexible channel selection and make this receiver an ideal choice for OB van applications or for use in shows.

• 2 true diversity receivers, 19" 1 U housing
• Integral antenna splitter, 2 x 1 : 2
• 32 programmable receiving frequencies per receiver
…

Sennheiser ME66 Condenser Microphone Features

The Sennheiser ME66 is a shot gun microphone capsule designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up direction. Matte black, anodized, scratch-resistant finish.

• Super-cardioid/lobar pick-up…

The Sennheiser MKH60 is a lightweight short gun microphone. It is versatile and easy to handle and its superb lateral sound muting makes it an excellent choice for film and reporting applications. Its high degree of directivity ensures high sound quality for distance applications.

Sennheiser MKH60 Condenser Microphone Features

• Extremely low inherent self-noise
• High sensitivity
• High directivity throughout the whole frequency range
• Transformerless and…

The ​Sennheiser EK 100 G3's adaptive-diversity technology provides excellent reception at all times. This receiver is designed to securely attach to a camera’s shoe using a clamp mount. The Sennheiser EK 100 G3 also can synchronize to a G3 transmitter with a simple push of a button. The ​Sennheiser EK 100 G3 is compatible with the optional DC 2 external adapter for extended use without batteries where a 12VDC source is available.

Sennheiser EK 100 G3 Features

• Sturdy metal…

The Sennheiser Drumkit 600 Drum Mic Kit is the ideal choice for anyone looking for an economic and convenient way to mic their entire drum kit.

Sennheiser Drumkit 600 Drum Mic Kit Includes

• e 602-II cardioid dynamic for kick drum
• 4 x e 604 cardioid dynamic for toms/snare
• 2 x e 614 super-cardioid condenser for overheads/hat
• Custom slim-line aluminum case with die-cut foam to protect your investment

…

Whether it's a feature film, documentary or ENG, the Sennheiser MKH8060 short gun condenser microphone will give you the quality sound to match your exciting pictures. It's very small dimensions are especially surprising when it shows its strengths as a professional gun microphone. Its excellent directivity and improved off-axis linearity ensure a clear and natural sound recording, whether you are in the studio or outdoors. Its special design ensures attenuation of off-axis sound without…

The venerable Sennheiser MKH416-P48U3 is a compact pressure-gradient microphone with short interference tube, highly immune to humidity due to its RF condenser design. Featuring high directivity, low self noise, high consonant articulation and feedback rejection, the Sennheiser MKH416-P48U3 can handle difficult exterior filming and reporting conditions without any difficulty. Supercardioid/lobe pattern, matte black finish, supplied with the MZW415 windscreen

Sennheiser MKH416-P48U3…

The Sennheiser ME102 modular mini-microphone capsule fulfills professional demands for sound quality and rugged handling, and is suitable for all areas of live work where a small and unobtrusive microphone is needed for vocal and speech applications. Scratch resistant matte finish. 

The Sennheiser ME102 Omnidirectional Miniature Lavalier Microphone  is available in Shure, Sennheiser or Hardwired setups.

Sennheiser e 604 Instrument Microphone Features

• Low distortion microphone
• Rugged reinforced glass-fibre body
• Easy to position due to compact design
• Low sensitivity to impact and handling noise

The Sennheiser MKH70 is a lightweight long gun microphone. Its excellent directivity is particularly suited to applications undertaken in difficult conditions, such as high background noise and distance microphone positioning. Its frequency-independent directivity prevents sound colouration from off-axis sound sources.

Sennheiser MKH70 Condenser Microphone Features

• Exceptionally low inherent self-noise
• Transformerless and fully floating balanced output
• …

The Sennheiser HMD25-XQ Sportscaster Headset with Boom Microphone is a lightweight split, supraural headphone combined with a supercardioid dynamic microphone.

Sennheiser HMD25-XQ Sportscaster Headset Features

• Superb transmission qualities
• Very light
• Two-piece padded headband, exceptionally comfortable
• Microphone can be worn on either left or right-hand side
• Terminated with 3 pin XLR and 1/4 inch phone plug

The Sennheiser MKE2 is a high quality, sub-miniature clip-on lavalier microphone (approx. 4 mm diam.) which has a multitude of applications where other clip-on microphones prove too obtrusive because of their larger size. It fulfills the most stringent sound quality demands and is extremely robust. It is suitable for both speech and instrument miking applications in all areas of live work.

Available for Senneheiser Setups.

…

Sennheiser SKM 100 G3 Features

Now with infrared sync function, the SKM100-835 G3 can tune to a G3 receiver with a simple push of the receiver’s sync button. Compatible with ew 100 G3 receivers and every vocal style, this hand-held transmitter/microphone combination provides wireless freedom to both performers and presenters alike. With rugged design and powerful sound, it is ideally suited for the stage as it is in the auditorium. Newly revised features such as the enhanced graphic…

The Sennheiser SKM 5200-II is a robust, reliable and user-friendly handheld transmitter. The SKM 5200-II offers a switching bandwidth of up to 184 MHz. The HiDyn plus noise suppression system developed by Sennheiser reduces RF noise to an absolute minimum, ensuring a wide dynamic range and crystal-clear sound. Programming is extremely flexible: the SKM-II 5200 has both a fixed and a variable channel bank. All parameters are shown on a backlit LCD; they can be locked to prevent accidental…

The AD4Q Four-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + AES67 + Dante™ output, and signal routing options bring a new level of management and flexibility to your entire workflow.

Sennheiser e 602-II Dynamic Cardioid Microphone Features

• Integral stand mount
• Fast transient response
• Low frequency extension
• Rugged, lightweight aluminum body

The Sennheiser ME104 modular mini-microphone capsule fulfills professional demands for sound quality and rugged handling, and is suitable for all areas of live work where a small and unobtrusive microphone is needed for vocal and speech applications. Scratch resistant matte finish: anthracite or nickel.

The Sennheiser ME104 Cardioid Miniature Lavalier Microphone is available for Senneheiser and Shure Transmitters.

…

AD1 delivers impeccable audio quality and RF performance with wide-tuning, High Density mode, and encryption. Features durable metal construction, optional rechargeable power with dockable charging, and TA4 and LEMO3 connector options.

The legendary Shure SM57 microphone is exceptional for musical instrument pickup and vocals. With its bright, clean sound and contoured frequency response, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. The ​Shure SM57’s outstanding performance, legendary reliability, and…

The Shure FP11 Mic-to-Line Level Amplifier is a portable, in-line amplifier designed to provide up to 84 db of gain so microphone and auxiliary levels can be run at line levels.

The Shure ULXD1 Beltpack Transmitters with Shure ULXD4Q 4 Channel Receiver system offers uncompromising 24-bit audio clarity and extremely efficient RF performance with single, dual, and quad channel receivers for any size professional sound reinforcement application. Scalable, intelligent hardware delivers the best performing digital wireless available, with a wide selection of trusted Shure microphones to choose from. Unmatched spectrum efficiency enables a dramatic increase in the number…

ADX1, like all ADX transmitters, sets the stage for exceptional performance, with wide tuning up to 184 MHz, interference protection, advanced rechargeability, streamlined design, and ShowLink remote control for real-time parameter adjustments right from the booth.

The Shure ULXD2 Handheld Transmitters with Beta 87C heads with Shure ULXD4Q 4 Channel Receiver system offers uncompromising 24-bit audio clarity and extremely efficient RF performance with single, dual, and quad channel receivers for any size professional sound reinforcement application. Scalable, intelligent hardware delivers the best performing digital wireless available, with a wide selection of trusted Shure microphones to choose from. Unmatched spectrum efficiency enables a dramatic…

The Shure MX150B is a professional electret condenser microphone ideal for applications requiring low-profile placement. Fully compatible with all Shure wireless systems, the discreet MX150B offers uncompromising sound quality and high reliability for television broadcasting, corporate lectures, A / V teleconferencing, houses of worship, and sound reinforcement.

Shure MX150B Subminiature Lavalier Microphone Features

• CommShield Technology guards against interference from…

The Shure WL185 is a lavalier electret condenser microphone designed for use with a wireless body-pack transmitter. The Shure WL185 has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. It features CommShield Technology, which guards against interference from cellular RF devices and digital bodypack transmitters.

Shure WL185 Cardioid Lavalier Microphone Specification

• Type: Condenser (electret bias)
• Frequency Response: 50 to 17,000 Hz
…

The Shure Beta 87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Shure Beta 87A combines superb performance with the ruggedness needed for touring and field production.

The Shure Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect…

The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide. The Shure Beta 58A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Shure Beta 58A has a shaped frequency…

The ​Shure UR4D receiver is a dual-channel receiver compatible with Shure's premium wireless. The latest technologies provide advanced control and robust flexibility for a wide range of professional uses. The Shure UR4D features Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

Shure UR4D Wireless Receiver Features

• Single-rack Dual Channel
• 2400 Selectable Frequencies Across 60 MHz Bandwidth…

The Shure MX 185BP is a wired lavaliere electret condenser microphone designed for speech and vocal pickup. It can be clipped to neckties, lapels, and other articles of clothing. Interchangeable cartridges make it possible to easily reconfigure microphone coverage as the need arises. The supplied MX1BP battery-powered preamplifier allows use of these microphones in situations where phantom power is not available.

Microflex Lavalier microphones bring a new level of sophistication to…

Designed for use in speech applications including sound reinforcement, broadcasting, and recording, the SCM820 uses IntelliMix technology to dramatically improve audio quality when many channels of microphones need to operate simultaneously. Multiple I/O configurations and networking options ensure analog and digital connectivity between devices.

Shure SCM820 8 Channel Automixer Features

• Offers networking capabilities, comprehensive software control, AMX and Crestron…

The Shure UA870 is an active UHF wireless directional antenna. It features a log periodic dipole array. When compared to an omnidirectional 1/2-wave antenna, the cardioid pattern provided by the UA870 offers enhanced reception of the desired coverage area and greater rejection of RF signals outside the coverage area.

To compensate for coaxial cable signal loss, the UA870 has an on-board amplifier that offers user selectable 3 or 10 dB gain. The gain setting is indicated by two LEDs.…

The Shure AD2 delivers impeccable audio quality and RF performance with wide-tuning, High Density mode, and encryption. Features durable metal construction, rechargeable power with dockable charging, and black finish.

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.

…

The Shure SE425 uses a dedicated tweeter and woofer for an accurate and balanced sound. Detachable cable with formable wire enables easy replacement and secure, comfortable fit. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation. Evolved from personal monitor technology that's been road-tested by pro musicians, the SE425 is engineered to provide reference quality audio for live performances or personal listening.

Shure SE425-CL Dual Earphone Buds Features

ADX2 and ADX2FD, like all ADX transmitters, set the stage for exceptional performance, with wide tuning up to 184 MHz, interference protection, advanced rechargeability, streamlined design, and ShowLink remote control for real-time parameter adjustments right from the booth.

The Shure ULXD1 is a wireless bodypack transmitter compatible with ULX-D Digital Wireless Systems. With a rugged yet lightweight aluminum case, the ULXD1 delivers uncompromising audio quality and RF performance, AES 256-bit encryption for secure transmission, and advanced rechargeability options for professional sound reinforcement applications.

Shure ULXD1 Wireless Bodypack Transmitter Features

• AES 256-bit encryption for applications requiring secure data transmission…

Short shotgun microphone offers a compact and lightweight recording option for near-field sound sources, and includes a foam windscreen, natural off-axis rejection and compatibility with VP89/S premium accessories.

Updated Technology

• Best-in-class audio performance
• Integrated preamplifier design (not modular)
• Wide aperture for near-field sound sources
• Natural off-axis rejection
• Economical choice with small footprint; compact…

For professional productions that demand flawless execution, Axient® Digital offers unprecedented signal stability and audio clarity, plus flexible hardware options, advanced connectivity, and comprehensive control.

The Sony MDR7506 Headphone is a large-diaphragm, foldable headphone designed for professional studio and live/broadcast applications. With its closed-ear design, wide frequency response and rugged design, it is a favorite of broadcast professionals across the globe. The Sony MDR7506 Headphone's 40mm driver unit ensures clear, high-quality sound reproduction and its stereo unimatch plug ensures compatability with 1/4"" and 1/8"" equipment. Reliable and stable signal connection and…

2 channel portable receiver for high quality sound for ENG/EFP productions

The URX-P03D 2-channel portable receiver forms part of a complete UWP-D audio system offering the sound quality of digital audio processing combined with the reliability of analog FM modulation. The URX-P03D offers wide frequency coverage with up to 72 MHz bandwidth (depending on region) across a wide range of channels, with a choice of models to choose from. Easy-to-use features include a large display and…

The Mini Stagebox 32 from Soundcraft provides a simple solution to stage connectivity offering a lower-cost option for many systems where the modularity and configurability of the larger systems are not required. The Mini Stagebox 32 (3U) provides 32 analogue inputs and 8 analogue line outputs, with 4 pairs of AES outputs, providing a total I/O capacity of 32 inputs and 16 outputs. It can connect to any of the Soundcraft Si Expression, Si Compact, Si Performer, Si Series and Vi Series…

Developed specifically for audio-for-picture applications, the Sound Devices 302 Three Channel Portable Mixer is the perfect tool for production companies and camera operators wanting to take control of their audio. The 302 dazzles with its size, flexibility, control and performance - it is the most compact and cost-effective battery-powered professional audio mixer in its class.With features to accommodate nearly any over-the-shoulder production, the 302 interfaces with wireless…

The Sound Devices HX3 is a portable stereo headphone amplifier for critical audio monitoring. This headphone amplifier is ideal for adding headphone feeds for portable and studio applications. The Sound Devices HX3 provides three independent audio feeds from balanced and unbalanced, line level sources. Each headphone output has its own level control, peak LED and 1/4" output connector. With extended bandwidth and high drive capability the ​Sound Devices HX3 can drive headphones of various…

The Sound Devices 664 Portable Production Mixer has six ultra-low noise, high-dynamic-range analog inputs. These transformer-less preamps accept mic or line-level signals, and include analog peak limiters, high-pass filters, input trim controls, and direct outputs. Input connectors 1 and 6 can be selected to accept AES42 or AES3 digital signals.

Want to buy this used gear when it becomes available? Get on the wait list…

The Sound Devices CL-6 Input Expander for 664 Field Production Mixer adds 6 balanced, line-level inputs to the 664. The Input Expander connects to the top or bottom of the 664 (see Mounting the CL-6) and includes 6 full-sized fader controls, PFL control, and highpass control, and dedicated L and R routing buttons for Inputs 7-12. The large, backlit Record and Stop buttons provide convenient access to transport functions. Other features include large, daylight-viewable LED meters (with track…

The Sound Devices MixPre Microphone Preamp is a studio-quality two-channel, portable, stereo microphone mixer. Its impressive audio performance and comprehensive features, including pan switches, built-in slate microphone, 1 kHz tone oscillator, and headphone monitoring, make it ideal for the front end of any studio or field production system.

Want to buy this used gear when it becomes available? Get on the wait list!…

The Telex PH88 is a super light-weight single muff headset with dynamic noise canceling microphone. Semi-rigid, fully adjustable gooseneck mic boom for precise positioning. High quality wide band earphones with moleskin covering for better fit, isolation and frequency response. Available for both Clearcom and RTS systems.

Want to buy this used gear when it becomes available? Get on the wait list!

The Tram TR50B is a miniature electret condenser microphone with minimum sound coloration for universal use.

Tram TR50B Lavalier Microphone Features

• Miniature Electret Condenser Microphone
• Minimum sound coloration for universal use
• Easily combined with boom microphones
• Tiny, lightweight and compact; easily concealed
• Extensive range of mounting accessories
• Wide frequency response
• Very low rubbing noise
• Internal battery…

Lectrosonics UM400a Wireless Transmitter Features

The Lectrosonics UM400a implements Digital Hybrid Wireless™ technology in a classic Lectrosonics belt-pack transmitter. A 5-pin input jack provides taps for low impedance dynamic mics, electret lavalier mics with positive or negative bias and line level inputs. Input gain is adjustable over a 43 dB range to perfectly match the audio input level for optimum modulation, minimum distortion and maximum signal to noise ratio. Input levels…

Lectrosonics Venue Wireless Receiver Features

The Venue Receiver system is a modular UHF design that operates with Digital Hybrid Wireless™ transmitters, and a variety of analog transmitters. It consists of a Venue Receiver Master (VRM) and one to six plug-in receiver modules. The VRM includes an antenna multi-coupler, computer communications interface and the mechanical rack mounting for the receiver modules. The VR’s design offers a tremendous degree of flexibility. For example,…

We rent both cabled and uncabled VDB boom poles in 6', 9' and 11' lengths.

Small Bag System package Includes

• Sound Devices 302 (1) - Developed specifically for audio-for-picture applications, the Sound Devices 302 mixer is the perfect tool for production companies and camera operators wanting to take control of their audio.
• Lectrosonics UCR401/UM400a (2) - A tracking front end is built into the Lectrosonics UCR411a receiver to correct for RF interference. The UM400a has optimum modulation, minimum distortion and maximum S/N ratio. All 400…

Boom Op System package Includes

• Shure FP22 (1) - The FP22 is a battery-powered stereo headphone amplifier that provides headphone feeds from any audio input source. It has the unique capability of monitoring mono, stereo and mixed mono and stereo inputs. The FP22 monitors and combines these signals in the headphones without affecting the original signal. Stereo or mono headphone outputs appear on 1/4-inch phone or mini 3.5 mm stereo jacks. The FP22 can drive headphones to very…

Large Double System Bag Package Includes

• Sound Devices 788T with CL-8 (1) - The 788T is a powerful eight input, eight-track digital audio recorder designed for production sound. Building on the success of the proven 7-Series architecture, the 788T offers greatly expanded input and output connectivity while continuing the 7-Series heritage of extensive control in a compact package. The CL-8 is a powerful mixing control surface for Sound Devices 788T recorder. Its large rotary…

The Medium ISO/TC Double System Bag Package includes

• Sound Devices 664 Mixer Recorder
• Lectrosonics UCR411/UM400a Wireless Systems (3)- A tracking front end is built into the Lectrosonics UCR411a receiver to correct for RF interference. The UM400a has optimum modulation, minimum distortion and maximum S/N ratio. All 400 series units are backwards compatible with the entire Lectro line.
• Sennheiser ME66/MKH60 Microphone with Boompole, Softie and Rycote Mount, FP22 (…

Light Double system Bag Package Includes

• Sound Devices 552(1) - The Sound Devices 552 is the most technologically advanced portable audio mixer ever made. Using the best analog and digital technologies, along with advanced mechanical construction, the 552 gives professionals a superb sounding, compact, lightweight and power-efficient mixer that is equally at home in simple run-and-gun applications or in complex multi-input, multi-output production setups.
• Lectrosonics…

Our Sportcasters Handheld Package with Command Function and IFB includes several Wireless Microphones, Audio Accessories, Communication, and RF Accessories. Here is a complete list of items included in this package.

Wireless Microphones

• 1 Sennheiser SKM5200-IIL Hand Held Trans 470-638 MHz
• 1 Sennheiser EM3732 MarkII Dual Receiver 470-638 MHz
• 1 Sennheiser B5000-2 Command Module for 5200 HH

Audio Accessories

• 1 Sennheiser MZW5000 Foam…