Here's a new tool in our growing arsenal of rental equipment to serve today's highly mobile production environment.
The IDX Cam-Wave HD CW-5HD is a lightweight on-camera wireless video system capable of transmitting uncompressed HD-SDI or SD-SDI up to 150 feet with virtually no latency. The Cam-Wave HD is perfect for Motion picture companies, television production units, news operations, and sports arenas. It eliminates the cables needed to send video to the producer's monitor or any camera receiving station (video village). Transmissions are sent via encrypted MIMO/OFDM.
Cam-Wave HD Features:
• Uncompressed wireless system for both HD-SDI and SD-SDI video
• Multiple formats of video with two channels of SDI embedded audio
• Latency less than 1ms
• Transmission range up to 150 feet (50m) in line-of-sight conditions or 100 feet (30m) through walls. Use in actual production may vary
• Conservative 12W power consumption
• Equipped with standard Anton Bauer 3-stud mount, allowing a direct attachment to an Anton Bauer battery for rear mounting on a camera or can be attached for DC operation
• Sleek and lightweight: weighing just 1.76 pounds, and no visible antenna
• Wireless transmission via MIMO/OFDM, operating between the 5.1 - 5.8GHz frequencies. No special license is required
• Selection of four manual or auto-select frequencies with 256-bit encryption
• Confomance to major international engineering standards including FCC, CE and RoHS specifications
Transmitter & Receiver Specifications:
• Frequency: 5.18GHz - 5.86GHz
• Tuning Range / Frequency selection: 4 Selectable Channels or Auto select
• Transmit Power: 89mW maximum
• Transmit Antenna: Internal 2dBi gain
• Transmit Method: MIMO
• Modulation: OFDM
• Latency: Less than 1ms
• Video Input: HD-SDI (SMPTE 292M) or SD-SDI (SMPTE 259M-C)
• Supported HD: 1080i/59.94, 1080i/50, 1080p/29.97, 1080p/23.98, 1080i/23.98PsF, 720p/59.94, 720p/50
• Supported SD: 525i/59.94, 625i/50
• Audio Input: 2 Channel SDI embedded
• Power Requirement: 10 - 17 VDC via battery plate or 4 pin XLR connector
• Power Consumption: 12W approx.
• Dimension (WxDxH): 6.23" x 2.44" x 7.41"
• Weight: 1.76 lbs
• Operating Range: 32-140 Degrees F
