The Lectrosonics SRA5P version comes with an external audio output (TA5M connector) for use with Sony cameras or cameras with only have one audio output in the slot. Use a breakout cable with two XLR connectors to access both channels external to the slot. The SRa5P can be used in bags as well.
Please note that the SRa5P is the receiver only - end plate kit must be ordered separately (please see Accessories below).
Click here for more information on the SR's compatibility with specific cameras.
The Lectrosonics SRa receiver offers two independent channels and fits into the standard video camera slots found on professional cameras. The two audio channels can feed separate inputs or can be mixed internally to feed a single input. Frequency response is 30 Hz to 20.
Two diversity modes are offered in the SRa. SmartDiversity™ reception is employed by independently combining antenna phase for each receiver channel. Alternately, the two channels can be used together in “True Diversity” Ratio mode as a single receiver. Graphic spectrum scanning provides quick and easy location of clear operating frequencies for interference-free operation.
The two Digital Hybrid Wireless receivers inside the SRa offer 256 frequencies each in one of nine available blocks, and operate with any of the Lectrosonics 400 Series transmitters without a compandor in the audio path. In addition, compatibility modes also facilitate operation with Lectrosonics 100 Series, 200 Series, and IFB analog systems, along with analog transmitters from two other manufacturers. Transmitter battery strength is monitored in the SR when using compatibility modes for 200 and 400 Series transmitters.
While mounted on a camera, the SRa is splash resistant—thanks to sealed membrane switches and LCD, along with a special gasket covering the slot opening. The SRa can be used with slot-equipped Sony, Ikegami, or Panasonic professional cameras via optional connector kits. A stand-alone kit is also available that enables using the SR out of the camera slot, powered from external DC, and provides two locking mini-XLR analog audio outputs.
Receiver audio frequency response is 30 Hz to 20 kHz, ±1 dB, while overall system response is determined by the transmitter and microphone element used. Signal to noise performance at the receiver output is 107 dB before limiting.
Consumer Alert: Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a wireless microphone system without a license is subject to certain restrictions: (1) may not cause harmful interference (2) must not be operated at a power level in excess of 50 milliwatts, and (3) it has no protection from interference received from any other device. Be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more info, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
|
